Spad.next Profile for the FSR500 for the following devices:
Thrustmaster Airbus TCA Captains bundle; Sidestick + Throttle Quadrant w/ Add-on
Logitech Multipanel
Logitech Radiopanel
If you do not have either of the panels or none, dont worry Spad.Next will still load the profile so long as you have the Thrustmaster gear
Features full throttle range with easy to put into Beta range (idle reverse) and working Reverse Lockout function that when enabled in the cockpit or with switch, prevents any reverse axis movement.
Speedbrake lever is used as Condition lever.
ENG 1 - Switch used for Reverse Lockout button in the overhead
ENG 2 - Used for the Bleed Lever
Left button - MAN Start/Stop
Ignition switch: CRANK - MAN fuel pump & ignition
NORM - OFF
IGN START - AUTO fuel pump & Ignition
Right button - Hold to Start
The only thing bound on the sidestick is the AP Disc button, should work correctly but not checked properly. myself i use in sim bindings for the sidestick to ensure minimal delay, so theres no elevator or aileron binds within Spad itself. But it can be added if needed.
Multi panel works like you'd expect it to with a few caveats that you can change if you want as i do not have the Switch panel, Auto Throttle Arm switch is bound to Taxi Light switch.
Flaps up and down is bound to Landing Lights.
Radio panel special function: Upper panel put into XPDR mode will control HDG & SPEED controls on the autopilot unit with working display numbers